Do it yourself
| ||||
|
Peugeot 206 - Video tutorial
Model: Peugeot 206
MK 1
- Years 1998-2012 In this simple video guide we will see how to remove the light from the passenger compartment ceiling light of a Peugeot 206. So, first get inside the car and with a strictly plastic lever we go to unhook the ceiling light itself: now we keep pressed the two iron tabs that we see inside in order to remove all the plastic piece. To disassemble the bulb, we disconnect the electrical connector by pressing the two side levers and access the bulb to replace it. Once all this is done we proceed with the reassembly of the ceiling light!
Posted on 11 December 2023 by ScegliAuto
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |