Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Light of Peugeot 306

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Interior dome light bulb

Is the interior light not working anymore? Let's see how to replace the bulbs in the Peugeot 306. Pry between the light and its lens (without breaking the plastics), pull the lens out from the light and replace the blown bulbs. To detach the light, pry at the plastics until it releases from the panel (disconnect the power connector). Replace the damaged bulb with a new one (same size and voltage). Refit the light in its housing (push the transparent plastic with your hands until the clips fully engage in the side plastic). Test the lights' proper functioning.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Wing Mirror of a Peugeot 306
Removing the External Wing Mirror of a Peugeot 306
Peugeot 306 (1993-2002 / MK 1) In today's tutorial video, you will learn how to remove and replace the external wing mirror of a Peugeot 306 in simple and quick steps. First, open …
Replacing the Fuel Pump on the Peugeot 306
Replacing the Fuel Pump on the Peugeot 306
Peugeot 306 (1993-2002 / MK 1) Below are the instructions on how to remove and replace the fuel pump on the Peugeot 306. First, open the rear hatch of your car and start by removin…
How to reset the service light on a 1998 Peugeot 306
How to reset the service light on a 1998 Peugeot 306
Peugeot 306 (1993-2002 / MK 1) The reset of the service light on a 1998 Peugeot 308 vehicle follows very simple steps. The first step is to keep the vehicle's ignition and engine o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos