Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light in a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Interior dome light bulb

As usual, before any maintenance operation on a car, position your Peugeot 307 on a ramp or flat surface to work safely and stably. Next, using a small pry tool (either plastic or metal), remove the transparent plastic part of the front interior light. This gives you access to the bulb, which you can then replace. Follow the same procedure for replacing the bulb in the rear interior light. To remove the entire rear light unit, use a simple screwdriver to lever out the two pins that hold it in place and extract it from its housing. To remove the front light unit, gently pull the frame out of its housing, unlock the two pins with your fingers, and then extract the unit. To also remove the frame, unscrew the central screw and unlock the clips.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlining of a Peugeot 307
How to Remove the Headlining of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's briefly go through the instructions necessary to remove and replace the headlining or interior roof lining of a Peugeot 307. First, get inside …
Removing the Interior Light on a Peugeot 307
Removing the Interior Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Are the bulbs in the interior light damaged? Here’s how to replace them. Use a screwdriver to pry between the lens of the interior light and the ligh…
How to Replace the Interior Light Bulb of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this brief and simple guide, follow the steps to remove and replace the interior light bulb of the Peugeot 307. First, get inside the vehicle and …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos