Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019

Replacing the cabin fan resistor on a Peugeot 208 is a straightforward procedure, requiring only a Torx screwdriver. First, remove the passenger side glove box by unscrewing the two screws at the top and the three screws at the bottom. Once done, detach the glove box from its housing, taking care with the connectors for the lights and airbag. Next, unclip the cover located behind the glove box by simply releasing it from its housing. This will give you access to the resistor, which you can replace by disconnecting the old one and reconnecting the new one to the connectors.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Internal Fan Resistor of the Peugeot 208?
How to Remove the Internal Fan Resistor of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) Today, you will learn how to replace the internal cabin fan resistor of the Peugeot 208. The steps to follow are quite simple and quick. The first st…
Where is the cabin fan resistor of the Peugeot 208 located?
Where is the cabin fan resistor of the Peugeot 208 located?
Peugeot 208 (2012-2019 / A9, MK 1) The cabin fan resistor of the Peugeot 208 phase 1 model is located inside the cabin, specifically behind the steering column under the fan. To ensure…
Solution to the malfunctioning of the Peugeot 208 cabin fan.
Solution to the malfunctioning of the Peugeot 208 cabin fan.
Peugeot 208 (2012-2019 / A9, MK 1) In this video we can see how the youtuber found a solution to the malfunction of the Peugeot 208's cabin fan: instead of the connector that powers th…

    Frequently Asked Questions

    • 208 2019-2026 - Where is the Pugeot 208 horn located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos