Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Key Fob Case and Battery for Peugeot

Model: Peugeot Peugeot Various
Part: Key

Video tutorial

Using a small flat screwdriver, gently pry open a small section at a time in the joint between the two halves of the case. This will allow it to open in two halves, giving you access to the internal part, which is the circuit board with the battery.

This will come out easily without further procedures. If your aim is to change the battery, simply remove it from its housing and insert the new one. If you need to replace the key fob case, open the new piece and insert the circuit board with the battery inside it. Close the two halves of the case by pressing them together with your hands.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Peugeot Peugeot Various Today, you will learn how to replace the key fob battery on Peugeot vehicles, using a CR 2032 battery. Position a flathead screwdriver near the metal…
Peugeot Peugeot Various This tutorial shows how to replace the key fob shell on a Peugeot, a very simple and quick operation. First, extend the metal emergency key, then pry…
Peugeot Peugeot Various Do you want to replace the battery in your Peugeot key? Let's see how to disassemble the Peugeot remote. Unscrew the fixing screw from inside the key…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos