Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement on Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Spark plugs

Open the bonnet and prop it up with the support rod. Unscrew the two screws securing the engine cover and remove it. Disconnect the four connectors going to the spark plugs and then remove the coils positioned above the spark plugs. Clean the various housings with an air compressor, then unscrew the spark plugs using a 14 mm socket. Insert the new spark plugs you purchased and screw them in tightly: it is recommended to use a torque wrench and tighten the spark plugs to 22 Nm. Refit the coils, reconnect the connectors, and screw the engine cover back on.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the spark plugs of the Peugeot 207
Replacement of the spark plugs of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To replace the spark plugs of the Peugeot 207, we open the hood of the engine compartment, unscrew the two screws that secure the plastic cover with …
Replacing Spark Plugs on Peugeot 207 1.6
Replacing Spark Plugs on Peugeot 207 1.6
Peugeot 207 (2006-2015 / MK 1) Lift the bonnet to access the Peugeot engine. Unscrew the securing bolts of the engine cover with a socket wrench, grasp it with your hands, and remo…
Replacing Spark Plugs on a Peugeot 207
Replacing Spark Plugs on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the spark plugs on a Peugeot 207. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Use a socket wrench t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos