Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Number Plate Bulbs on Peugeot and Citroen Cars

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: License plate light

See other generations:
Video tutorial

The same simple method shown in this tutorial applies to almost all Citroen and Peugeot cars produced in the same years. Replacing the number plate bulbs involves simply removing the housings that contain them by prying with a small flat screwdriver (it’s best to do this on the right side if you are facing the cabin).

After that, disconnect the connector and you can replace the bulb itself. If you are installing an LED, it will come with its own housing that you will connect directly to the connector.

Good luck!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to replace the license plate bulbs on the Citroen C5
How to replace the license plate bulbs on the Citroen C5
Peugeot 308 (2013-2021 / T9, MK 2) In this guide we will see the instructions that will allow us to disassemble and replace the license plate bulbs of the Peugeot 308, in simple steps.…
Replacing the Number Plate Lights on a Peugeot 308
Replacing the Number Plate Lights on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Replacing the number plate lights on a Peugeot 308? Follow this guide to replace the damaged bulbs with new LED bulbs. Using a screwdriver or a lever…
Replacing the Number Plate Bulb on Peugeot 308
Replacing the Number Plate Bulb on Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Replacing the number plate bulb on a Peugeot 308, as with almost all car models, is really simple. Open the boot to work in a more comfortable positi…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos