Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Bulb on Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: License plate light

Replacing the number plate bulb on a Peugeot 308, as with almost all car models, is really simple. Open the boot to work in a more comfortable position. Use a small flat-head screwdriver or any pointed tool to pry off the transparent cover of the affected light by leveraging in the side slots. Once done, you have reached your destination: at this point, you can remove the burnt bulb and insert the new one you purchased. Simply snap the light cover back into place by hand.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Peugeot 308
How to Reset the "Service" Light on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…
How to Top Up the AdBlue Fluid on a Peugeot 308
How to Top Up the AdBlue Fluid on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you can start, open the boot lid of your Peugeot 308. First, unclip and remove the lower boot floor. Then, unscrew the AdBlue refill cap. Once…
Changing the Battery on a Peugeot 308
Changing the Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos