Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Side Mirror Cover on Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Side mirror

See other generations:
This video is currently unavailable

How do you remove the cover of a Peugeot Boxer mirror? Follow these steps for disassembling the cover pieces. Pry between the edge of the mirror frame and the mirror glass.

Continue prying until the plastics detach from the mirror (disconnect the power cable). Unscrew the screws with a screwdriver to disconnect the mirror cover and the side indicator.

Remove the cover from above the mirror. Replace the damaged piece with the new one: ensure the plastic clips snap into the supports of the mirror.

Tighten the screws and reattach the indicator and then the mirror.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Peugeot Boxer
How to Set the Time on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Before you can start, sit in the driver's seat of your Peugeot Boxer. Begin by activating the instrument cluster by turning the key in the ignition s…
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …
How to Remove the Starter Motor on a Peugeot Boxer
How to Remove the Starter Motor on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Want to remove the starter motor from the Peugeot Boxer? Here’s how to do it from inside the engine compartment. Disconnect the battery terminals loc…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos