Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Starter motor

See other generations:
Video tutorial

Want to remove the starter motor from the Peugeot Boxer? Here’s how to do it from inside the engine compartment. Disconnect the battery terminals located in the cabin (under the floor).

Raise the Boxer to the desired height, then unscrew the bolts of the starter motor from below: remove the damaged part from under the vehicle. Fit the new starter motor, connecting the power cables and securing them with the associated bolts.

Prepare to reconnect the battery cables and perform a functionality check upon ignition.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on a Peugeot Boxer
How to replace the starter motor on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The instructions in this guide will show you the procedure for removing and replacing the starter motor on a Peugeot Boxer, as well as on a Fiat Duca…
How to Replace the Windscreen Wiper Motor on the Peugeot Boxer - Fiat Ducato
How to Replace the Windscreen Wiper Motor on the Peugeot Boxer - Fiat Ducato
Peugeot Boxer (2006-2024 / MK 2) This guide will show you the steps to remove and replace the windscreen wiper motor on the Peugeot Boxer and Fiat Ducato. First, open the bonnet and …
How to Replace the Wiper Motor on a 2012 Peugeot Boxer
How to Replace the Wiper Motor on a 2012 Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) This video shows how to replace the wiper motor on a 2012 Peugeot Boxer. First, remove the two wiper arms and pull off the seal along the edge of the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos