Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to remove the air filter of a Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Air filter
Operation: How to remove the air filter of a Peugeot 3008

Before we can start, we will have to go to open the front hood of our Peugeot 3008. Let's start by unscrewing and removing the screws that secure the upper cover of the air filter, and then disconnecting the relative sleeves. When we have completed this step, we will be able to remove the cover, and we will have reached the air filter. At this point, all we have to do is take the air filter out of its housing. When we have completed this last step, we will be able to permanently remove the air filter, and we will have successfully completed the disassembly.


Posted on 18 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the cabin filter located, in the Peugeot 3008? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 air filter located? Read Answer
    • 3008 2016-2023 - Where is the pollen filter on my paugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos