Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Engine Fuse Box on Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Fuse box

In this short video, we will see the location of the engine fuse box and how to access it on a Peugeot Boxer, following these simple instructions. First, open the bonnet of your car and locate the engine fuse box, which is near the battery; disconnect the negative terminal of the battery beforehand. Next, remove the plastic cover of the fuse box and take out any blown fuse, so you can replace it with a new one of the correct type, referring to the diagram and codes found on the cover itself!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Position of the external fuse box of the Peugeot Boxer - Fiat Ducato
Peugeot Boxer (2006-2024 / MK 2) Below we will see how to access the external fuse box of the Peugeot Boxer, as well as the Citroen Relay and the Fiat Ducato. First, open the vehicle…
Where is the Peugeot Boxer's glove box located?
Where is the Peugeot Boxer's glove box located?
Peugeot Boxer (2006-2024 / MK 2) The Peugeot Boxer produced from 2002 to 2009 contains four fuse boxes. To know the exact location of the fuses, we must refer to the label placed on …
Fuse Box Diagram and Location for the Peugeot Boxer
Fuse Box Diagram and Location for the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In today's tutorial video, we will look at the diagram and positioning of the fuse boxes for the second series Peugeot Boxer, as well as the Fiat Duc…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos