Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Peugeot 3008?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Cabin air filter

To replace the cabin filters on the Peugeot 3008, remove the clips securing the plastic panel located under the glove compartment on the passenger side. Once the plastic panel is removed, the filter cover will be on the side of the compartment: it must be removed to extract the two old filters. Once the two old filters are removed from their housing, insert the new lower filter and the upper filter. Finally, refit the filter cover and the plastic panel.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Peugeot 3008?
How to Replace the Cabin Filter on the Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the cabin filter on the Peugeot 3008, open the glove compartment located on the passenger side. Once the compartment is open, remove the c…
How to Replace the Cabin Air Filter in a Peugeot 3008
How to Replace the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the cabin air filter in a Peugeot 3008? Start by removing the cover located on the right side of the glove compartment (unscrew the se…
Replacement of the fuel filter of the Peugeot 3008 1
Replacement of the fuel filter of the Peugeot 3008 1
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the diesel filter of the Peugeot 3008, open the hood, remove the engine cover, disconnect the electrical connector and the three fuel line…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos