Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Roof Bars on the Peugeot Bipper - Fiat Fiorino

Model: Peugeot Bipper Tepee MK 1 - Years 2007-2016
Part: Roof rack bars

In today’s tutorial, you will see how to install roof bars on the Peugeot Bipper, as well as on the Fiat Fiorino, Citroen Nemo, and Fiat Qubo. First, remove the seals from the roof bar mounting points by prying them off with something thin; then unscrew the screws located underneath, as shown in the video. Next, install the brackets for your roof bars, securing them properly; then fit the bars. The installation procedure may vary depending on the model of roof bars.

Updated on 21 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Install the Car Radio in the Peugeot Bipper Tepee - Citroen Nemo
How to Install the Car Radio in the Peugeot Bipper Tepee - Citroen Nemo
Peugeot Bipper Tepee (2007-2016 / MK 1) .. Bipper Tepee, as well as in the Citroen Nemo and Fiat Fiorino. First, get inside the vehicle and start removing the car radio mounting bracket by prying.. …
Where is the OBD Port on the Peugeot Bipper?
Where is the OBD Port on the Peugeot Bipper?
Peugeot Bipper Tepee (2007-2016 / MK 1) If you own a Peugeot Bipper and want to locate the OBD port yourself, simply follow this guide step by step. First, enter your Peugeot Bipper and rea…
Diagram and Location of Fuses in the Peugeot Bipper Tepee
Peugeot Bipper Tepee (2007-2016 / MK 1) In this brief and simple guide, we will look at the diagram and positioning of the fuse boxes in the Peugeot Bipper Tepee, following the instructions…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos