Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Remove the Door Panel on the Peugeot Partner 2

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this video, you will see the main steps to remove the front door panel on the second series Peugeot Partner, as well as on the Citroen Berlingo. First, open the front door and start by removing the plastic cover of the speaker; then unscrew the securing screws found underneath, as shown in the video.

Next, remove the plastic cover of the grab handle by unscrewing the additional screws underneath; use a Torx screwdriver for this. Finally, pry at the edges of the panel to remove it!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How to remove the door panel of a Peugeot Partner
How to remove the door panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open the door of your Peugeot Partner. Begin by prising out and removing the insert of the internal handle using a thin but sturdy t…
Removing the Front Door Panel of the Peugeot Partner Tepee
Removing the Front Door Panel of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) These instructions will allow you to remove and replace the front door panel of the Peugeot Partner Tepee. First, open the front door and start by re…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos