Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Handle and Lock on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Door lock

To remove the handle and lock on the Peugeot 307, first remove the door panel (for this, follow our other tutorials where we show this work). After doing this, unscrew the three T30 Torx screws located on the side of the door, disconnect the lock cable and the plastic mechanism by unscrewing the 10 mm nuts. At this point, using a flat screwdriver or a plastic wedge, extract the external handle of the door and the lock. Proceed in reverse until complete reassembly. Good luck!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 307 (2001-2009 / MK 1) Let's look at removing the lock located in the door of the Peugeot 307. Remove the cover of the internal door handle and take out the window lift but…
Peugeot 307 (2001-2009 / MK 1) To replace the roof handle on a Peugeot 307, use a tool like a screwdriver to pry off the plastic covers located on either side of the handle. Once t…
Peugeot 307 (2001-2009 / MK 1) Following these brief instructions, we will see how to disassemble the front door panel of the Peugeot 307. First, we open the front door and start u…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos