|
Do it yourself
| |||
| ||||
Replacing the Rear Brake Pads on the Peugeot 3008
Model: Peugeot 3008
P84, MK 2
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
Today, you will replace the brake pads on your Peugeot 3008 as shown in the video. First, since this vehicle is equipped with an electric handbrake, you will need a diagnostic computer to connect and activate the rear caliper opening command by putting it in maintenance mode. Once this step is completed, lift the vehicle with a professional four-wheel hydraulic jack and remove the wheel by unscrewing the four bolts. Although the video in the description also replaces the discs, to remove and replace just the pads, simply loosen the brake caliper to extract them. After removing the pads, insert the new ones and retract the caliper piston using the appropriate tool; now, simply reassemble the wheel and perform the operation on the other rear wheel.
Updated on 30 April 2026 by ScegliAuto
Related tutorials
Peugeot 3008
(2009-2016 /
MK 1, T84)
Today's instructions will allow us to remove and replace the rear brake pads on the Peugeot 3008. First, lift the vehicle and start removing the rear…
Peugeot 3008
(2016-2023 /
P84, MK 2)
Below are the instructions that will allow you to remove and replace the front brake pads of the Peugeot 3008. First, lift the vehicle and start by r…
Peugeot 3008
(2009-2016 /
MK 1, T84)
In this tutorial, see how to replace the rear brake pads in the Peugeot 3008, a very straightforward task. First, open the bonnet, then unscrew the c…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
