Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Pads of the Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Brake pads

Below are the instructions that will allow you to remove and replace the front brake pads of the Peugeot 3008. First, lift the vehicle and start by removing the front wheel by unscrewing the bolts; then apply pressure to the caliper piston to retract it, unscrewing the two rear screws of the caliper to remove it from the disc, as shown in the video. At this point, remove the old brake pads, cleaning the caliper of any residual dirt; install the new original pads, remounting the brake caliper onto the disc.

Posted on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on a Peugeot 3008
Replacing the Front Brake Pads on a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In this guide, you will find instructions to remove and replace the front brake pads on a Peugeot 3008. First, lift the vehicle and begin by removing…
Replacing the Rear Brake Pads on the Peugeot 3008
Replacing the Rear Brake Pads on the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today's instructions will allow us to remove and replace the rear brake pads on the Peugeot 3008. First, lift the vehicle and start removing the rear…
Replacing Front Brake Pads on Peugeot 3008
Replacing Front Brake Pads on Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the brake pads is a maintenance task you can easily do yourself. Start by loosening the wheel bolts on the front wheel slightly before lift…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos