Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Rear-View Mirror of a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Rearview mirror

Using a small flathead screwdriver and leveraging it, start by removing the upper cover from the mirror. Next, disconnect the connector located at the back. Once the rear connector is detached, slide the mirror down and gently pull it out. This will successfully disassemble the interior rear-view mirror. To fit the new mirror, simply follow these instructions in reverse. Once the new mirror is fitted, you will have successfully completed the replacement.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Wing Mirror on Peugeot 307
How to Remove the Wing Mirror on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How do you remove the wing mirror on a Peugeot 307? In this guide, remove the door panel along with the screws. Use a screwdriver to undo the securin…
How to Replace the Headlining on a Peugeot 307 SW?
How to Replace the Headlining on a Peugeot 307 SW?
Peugeot 307 (2001-2009 / MK 1) To replace the headlining on a Peugeot 307 SW, remove the screws securing all components on the upper part of the roof: these include the sun visors,…
How to Replace the External Wing Mirror on a Peugeot 307
How to Replace the External Wing Mirror on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the external wing mirror on a Peugeot 307, remove the internal plastic cover corresponding to the mirror. Next, loosen the bolts securing …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos