Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to remove the exterior mirrors of the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Outside rearview mirror
Operation: How to remove the exterior mirrors of the Peugeot 206?

Removing the external rearview mirror of the Peugeot 206, whether it is right or left, is a very simple operation, let's see how to proceed in this tutorial. First we remove the internal plastic cover held in place, then we disconnect the connector of the adjustment motor and unscrew the 3 Torx fixing screws. At this point we can extract the mirror and insert the spare. The assembly will be just as simple, it is sufficient to follow the same procedure inversely. It is recommended to test the correct functioning of the regulator before mounting everything.


Posted on 26 March 2024 by ScegliAuto



Replacement of the exterior rear view mirror of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's see the main instructions on disassembling and replacing the exterior rear view mirror of the Peugeot 206, in simple and quick steps. First we
How to remove the exterior mirror of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) We see below the step-by-step instructions to remove and replace the external rearview mirror of the Peugeot 206. First we open the front door of our
How to replace the exterior mirror on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The replacement of the external rear-view mirror of the Peugeot 206 is carried out by detaching the triangular plastic cover located inside the door,

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos