Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Window Switch Panel on Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Power window switch

This video is currently unavailable

In today's video, you will see how to remove the window switch panel from a Peugeot 206. First, get inside the vehicle and take a plastic lever or something sharp: then, pry off the switch panel from the sides (without damaging anything). At this point, simply disconnect the electrical connector located at the back by pressing the tab to finally detach the window switch panel along with the mirror adjustment knob.

To refit the part, just follow the reverse procedure!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Door Panel on a Peugeot 206
Replacing the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel on a Peugeot 206 if it is irreparably damaged and cannot be replaced. Here’s how to do it. Using a screwdriver, unscrew the sc…
How to Remove the Window Switch Panel from the Peugeot 206
How to Remove the Window Switch Panel from the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Follow these simple steps to remove and replace the window switch panel of the Peugeot 206. First, open the bonnet and disconnect the battery. Then, …
Removing Door Panel on Peugeot 206
Removing Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video tutorial, you will learn how to remove the rear door panel of a Peugeot 206. First, open the door and remove the hex screw located insi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos