Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : How to dismantle the power window switch of Peugeot 206.

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Window lift button
Operation: How to dismantle the power window switch of Peugeot 206.

Shortly, we will see the instructions that will allow us to disassemble and replace the power window switch of the Peugeot 206, following these simple steps. First of all, we open the engine hood and disconnect the battery as a precaution; then we get into the car and lever the sides to detach and remove the switch from the central tunnel, disconnecting the electrical connector found underneath, as shown in the video. At this point, we replace the single damaged button or, if necessary, the entire switch assembly; we make the electrical connection and test its operation!


Posted on 1 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos