Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Peugeot 407

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Starter motor

In this guide, discover how to dismantle and replace the starter motor on the Peugeot 407 by following the instructions below. First, open the bonnet of your car and start by removing the air intake, disconnecting it from the intake hose; then remove the air filter box located underneath, as shown in the video. At this point, dismantle the starter motor by unscrewing the screws and disconnecting the various electrical cables; simply replace it with the new one, following the video tutorial to the end!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor from a Peugeot 407
How to Remove the Starter Motor from a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) To replace the starter motor on a Peugeot 407, open the bonnet and disconnect the battery. Next, unscrew the bolts securing the intercooler and remov…
Replacement of the starter motor of the Peugeot 407 2.0 HDI
Replacement of the starter motor of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) Today we will discover the main steps on how to disassemble and replace the starter motor of the Peugeot 407 2.0 HDI. First, we open the hood of the …
Where is the box of the Peugeot 407?
Where is the box of the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The Peugeot 407 has two fuse boxes located in different parts of the vehicle. The first fuse box is located under the front hood, specifically next t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos