Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to reset the Trip A entry of the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: -board computer
Operation: How to reset the Trip A entry of the Peugeot 3008

Trip A (also referred to as Trip 1) indicates the partial kilometers traveled with your Peugeot 3008. If you want to reset it quickly and easily, all you have to do is read the following mini guide carefully. First you must obviously turn on the ignition of the vehicle (without also starting the engine). Immediately after, locate the button located at the end of the right wiper lever and press it several times until you see the Trip 1 item on the mini display of the dashboard. At this point, keep the same button pressed until the reset is performed and finally release it.


Posted on 13 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - What does "Parking assistance system error" mean on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the screen of the Peugeot 3008 not turning on? Read Answer
    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read Answer
    • 3008 2009-2016 - Why is the tire pressure not monitored on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What to do with stuck Peugeot 3008 touch screen? Read Answer
    • 3008 2016-2023 - How to solve Peugeot 3008 display malfunctions? Read Answer
    • 3008 2016-2023 - What does the adblue light on the Peugeot 3008 mean? Read Answer
    • 3008 2009-2016 - What does the turning on of the engine light mean in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why does the AdBlue warning light flash in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What does the orange warning light with the exclamation mark mean in the Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos