Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Steering Wheel Airbag from a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Airbag

In this brief video tutorial, see how to remove the steering wheel airbag from a Peugeot 206. Before starting this operation, it is crucial to disconnect the vehicle's battery and wait a few minutes to avoid triggering the airbag. To access the steering wheel, press firmly with a screwdriver on a tab located at the bottom rear of the steering wheel, as shown in the video. Once the steering wheel is open, disconnect all the airbag connectors and the red horn wire. After completing these steps, you can safely remove the central part of the steering wheel with the airbag.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel Airbag on a Peugeot 206
Removing the Steering Wheel Airbag on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) .. How do you remove the steering wheel airbag from a Peugeot 206? Start by disconnecting the battery terminals located.. …
How to Remove the Steering Wheel from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Do you want to remove the steering wheel with the airbag from your Peugeot 206? Here’s how to detach the airbag from the steering wheel and then the …
How to disassemble the steering wheel of the Peugeot 206
How to disassemble the steering wheel of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the steering wheel of the Peugeot 206. First, we get into t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos