Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Fuse box

In this video, you can see the location of the fuse boxes and their diagrams for the Peugeot 2008, to consult if you need to check the fuse of a malfunctioning device. In this model, there are two fuse boxes inside the cabin, one located behind the glove compartment on the passenger side, and the other behind a small panel on the driver's side. Finally, the third and last box is inside the engine compartment, just to the right of the battery. If a fuse is blown, remember to always use a replacement of the same amperage.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Positioning of the Fuse Boxes of the Peugeot 2008
Diagram and Positioning of the Fuse Boxes of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Today's guide will show you the diagram and positioning of the fuse boxes of the Peugeot 2008. First, get into the vehicle and start removing the pla…
What is the Fuse Box Diagram for the Peugeot 2008?
What is the Fuse Box Diagram for the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) In this video, we can see the location of the fuse boxes and their diagrams for the Peugeot 2008, useful in case you need to check the fuse for a mal…
Fuse Box Diagram for a Peugeot 2008
Fuse Box Diagram for a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The Peugeot 2008, first series model produced from 2013 to 2019, has three fuse boxes. With this very useful video guide, you can see the location, n…

Other guides you may be interested in

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Where is the cooling fan relay located in the Peugeot 2008? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos