Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan on the Peugeot 407

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Blower motor

Today, in this video tutorial, you will find a guide that will allow you to remove and replace the cabin fan motor on the Peugeot 407. First, get inside the vehicle and start removing the entire dashboard; to do this, you will need to take out the central instrumentation (the climate control and the radio), the instrument cluster, and the glove compartment, as shown in the video. At this point, you will find the cabin fan, which you will remove by disconnecting its electrical connector and unscrewing the screws; apply the reverse procedure for reassembly!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan of the Peugeot 407
How to replace the cabin fan of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) These short and simple instructions will show us how to disassemble and replace the cabin fan of the Peugeot 407. First, we open the front door on th…
Removing the Cabin Fan on Peugeot 407
Removing the Cabin Fan on Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Here’s how to remove the heater radiator on a Peugeot 407. Remove the plastic cover from the centre tunnel (located under the centre tunnel on the le…
Where is the Cabin Fan Fuse Located in a Peugeot 407?
Where is the Cabin Fan Fuse Located in a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) If the cabin fan in your Peugeot 407 has suddenly stopped working, first check the status of the respective fuse, the location of which is indicated …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos