Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 407
    4. : How to remove the instrument cluster of the Peugeot 407

Peugeot 407 - Video tutorial

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Instrument cluster
Operation: How to remove the instrument cluster of the Peugeot 407

Let's briefly see the main steps on how to disassemble and replace the dashboard instrument cluster of the Peugeot 407, following the instructions below. First of all, let's get on board the car and start inserting something thin and pointed to unhook and remove our instrument panel, as shown in the video; then we disconnect the electrical wirings that we find on the back, definitively removing our instrument panel from the dashboard. So we just have to reassemble our instrument panel, applying the reverse disassembly procedure!


Posted on 8 June 2022 by ScegliAuto

    Frequently Asked Questions

    • 407 2004-2012 - What does the yellow engine warning light on the Peugeot 407 indicate? Read Answer
    • 407 2004-2012 - What does the red engine light on the Peugeot 407 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos