Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to perform a service reset on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: -board computer
Operation: How to perform a service reset on Peugeot 3008

In this video tutorial we can see how it is possible to reset the maintenance warning light (wrench warning light), following a few simple steps that will guide you towards the correct management of your vehicle. First of all, if the warning light comes on with the wrench, replace the engine oil and filters as soon as possible. Then get in your car, apply the handbrake and insert the key and turn on the instrument panel. Press and hold the button under the speedometer on the right (see video); you see the countdown appear, so press and hold the button until the count reaches zero. At this point the reset has been performed. Switch the ignition off and on again to check that the warning light has gone out.


Posted on 3 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - What does "Parking assistance system error" mean on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the screen of the Peugeot 3008 not turning on? Read Answer
    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read Answer
    • 3008 2009-2016 - Why is the tire pressure not monitored on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What to do with stuck Peugeot 3008 touch screen? Read Answer
    • 3008 2016-2023 - How to solve Peugeot 3008 display malfunctions? Read Answer
    • 3008 2016-2023 - What does the adblue light on the Peugeot 3008 mean? Read Answer
    • 3008 2009-2016 - What does the turning on of the engine light mean in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why does the AdBlue warning light flash in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What does the orange warning light with the exclamation mark mean in the Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos