Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the turn signal light bulb on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Side turn signal light bulb
Operation: How to replace the turn signal light bulb on Peugeot 3008

To be able to replace the rear turn signal lamp of the car Please refer to the indications given below. Operationally, it will be necessary to remove the rear light unit and to do this it is necessary to access the side panel of the boot which must be removed by levering with a small screwdriver. Inside the compartment there is a screw which must be unscrewed in order to be able to remove from the outside by pulling the entire optical unit towards you, then proceed to disconnect the power supply terminals placed behind it. Then release the fixing hook of the lamp and rotate it to extract it, take the new bulb and place it in the compartment, taking care not to touch the bulb with your fingers, re-attach the hook, reposition the optical unit in its seat and tighten the rear screw fixing.


Posted on 14 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos