Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Peugeot 108 - Citroen C1 - Toyota Aygo

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

Video tutorial

Below are the instructions to reset the tyre pressure warning light (TPMS) on the Peugeot 108, as well as on the Citroen C1 and Toyota Aygo; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the vehicle and open the glove compartment located on the driver's side; turn on the ignition and press and hold the TPMS button until the warning light on the instrument panel resets.

Finally, turn off the ignition and start the engine!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light of the Peugeot 108
How to Reset the Tyre Pressure Warning Light of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) .. warning light of the Peugeot 108, as well as the Citroen C1 and Toyota Aygo. Before recalibrating the TPMS sensors, ensure all four tyres are at the.. …
How to Reset the Tyre Pressure Light on a Peugeot 108
How to Reset the Tyre Pressure Light on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure light on a Peugeot 108, start by turning on the ignition. Notice the yellow light on the dashboard indicating that you nee…
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, open the glove compartment located on the passenger side. Once opened, locate the button…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos