Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

Video tutorial

If you need to replace the external wing mirror on your Peugeot 407 but don't know how to proceed, don't worry as you will find all the necessary instructions below. Before you start, remember to completely switch off the car and park it safely on a flat surface.

Then, go to the mirror that needs replacing and, using a small flat screwdriver, detach it from its housing. Complete the removal by hand, being careful not to damage the mirror, and finally, fit the new model.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on a Peugeot 407?
How to Replace the External Wing Mirror on a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To replace the external wing mirror on a Peugeot 407, first remove the door panel. To do this, loosen the screws located on the side of the panel, ne…
How to Replace the Mirror Cap on the Peugeot 407
How to Replace the Mirror Cap on the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this short video tutorial, you will see the steps to remove and replace the outer mirror cap, whether right or left, on a Peugeot 407 (as well as …
Replacing the External Wing Mirror
Replacing the External Wing Mirror
Peugeot 407 (2004-2012 / MK 1) To replace the external wing mirror, you must first remove the door panel: unscrew the fixing screws of the panel (some are located beneath the inter…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos