Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

Video tutorial

To replace the external wing mirror, you must first remove the door panel: unscrew the fixing screws of the panel (some are located beneath the internal handle, from which the covering must be removed; also remove the covering of the opening handle) and unclip the pressure clips along the edges.

Once the panel is removed, access the fixing pin of the wing mirror through the designated hole: unscrew the pin, disconnect the adjustment control connector, and remove the old mirror along with the wiring.

Then install the new mirror, correctly positioning the cables and tightening the fixing pin; reverse the process to reassemble the panel.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Mirror Cap on the Peugeot 407
How to Replace the Mirror Cap on the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this short video tutorial, you will see the steps to remove and replace the outer mirror cap, whether right or left, on a Peugeot 407 (as well as …
How to Replace the External Wing Mirror on a Peugeot 407
How to Replace the External Wing Mirror on a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) If you need to replace the external wing mirror on your Peugeot 407 but don't know how to proceed, don't worry as you will find all the necessary ins…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Peugeot 407 (2004-2012 / MK 1) If possible, position the vehicle on a lift or suitable ramps to raise it and gain easier access to the oil sump; before replacing the filter, unscre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos