Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Oil filter

Video tutorial

If possible, position the vehicle on a lift or suitable ramps to raise it and gain easier access to the oil sump; before replacing the filter, unscrew the drain plug from the oil sump and drain the used oil; once drained, screw the plug back in. The oil filter (cartridge type) is located at the front left of the engine bay (when facing the front), just below the turbocharger: to access it easily, it is suggested to remove the intake duct.

At this point, unscrew the cap of the filter container, remove the old cartridge, and insert the new one, replacing the O-ring seals as well.

Then fill the engine with new oil until reaching the maximum level.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Peugeot 407 2005
How to replace the air filter of the Peugeot 407 2005
Peugeot 407 (2004-2012 / MK 1) A worn or dirty engine air filter can lead to power loss and abnormal overheating of your Peugeot 407 (2005). Below, we will explain how you can repl…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Peugeot 407 (2004-2012 / MK 1) The cabin air filter is located on the driver's side, just behind the centre console, right next to the accelerator pedal; start by removing the soun…
Replacing the cabin air filter in the Peugeot 407
Replacing the cabin air filter in the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) To ensure that the air conditioning system in the Peugeot 407 always distributes clean air in the cabin, replace the dedicated filter at the interval…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos