Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Bulbs on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: License plate light

Video tutorial

In this short video, you will learn how to remove and replace the number plate lights on the first series Peugeot 207 by following these simple and quick steps. First, get something sharp to detach and remove the light cover; then lever on the sides where there is a small gap. At this point, remove and replace the bulb with a new one of the correct type; insert it properly into the lamp holder and then refit the light cover, securing it correctly.

Repeat the same process for the other number plate light!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb in the Peugeot 207?
How to Replace the Number Plate Bulb in the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the number plate bulb on the Peugeot 207, detach the cover light that protects the bulb, located directly above the number plate. Once thi…
How to Change the Battery on a Peugeot 207
How to Change the Battery on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you change the battery on a Peugeot 207? Follow the guide shown in the video. Open the car door and pull up the engine compartment release lev…
How do you reset the sunroof of the Peugeot 207 cc?
How do you reset the sunroof of the Peugeot 207 cc?
Peugeot 207 (2006-2015 / MK 1) The convertible version of the Peugeot 207, namely the Peugeot 207 cc, could suddenly show electrical problems with the opening of the roof, which ca…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos