Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air Conditioning Blower Repair Kit

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air conditioning

Video tutorial

In case of failure of the air conditioning blower, the cause is usually the breakage of the teeth on the gear that controls the opening and closing mechanism of the blower's flaps. To resolve this issue, a repair kit has been created that includes a spacer plate for the motor and a new gear to overlay the original one: thanks to the spacer, the motor's gear will drive the new gear fitted onto the damaged original.

Once the passenger side glove box is removed, detach the blower motor, unclip the gear to fit the spacer plate, insert the new gear from the blower side, and assemble everything.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Removing the Air Conditioning Compressor from the Peugeot 307
Removing the Air Conditioning Compressor from the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this brief guide, we will see how to remove and replace the air conditioning compressor of the Peugeot 307, following the instructions below. Firs…
How to Remove the Air Conditioning Knobs on a Peugeot 307
How to Remove the Air Conditioning Knobs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How do you remove the air conditioning knobs on a Peugeot 307? Follow these steps: remove the dashboard trim covering the air conditioning controls u…
How to Remove the Driver's Side Air Vent on the Peugeot 307
How to Remove the Driver's Side Air Vent on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This brief guide outlines the main instructions for removing and replacing the driver's side air vent on the Peugeot 307. First, get into the vehicle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos