Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Blower motor

Today's instructions will show us how to disassemble and replace the blower motor of the Peugeot 307's cabin. First, we get on board the vehicle, on the front passenger side, and proceed to disassemble and remove the glove compartment, unscrewing all the fixing screws; then we will find the cabin blower at the back, as shown in the video. At this point, we disconnect its electrical connector and unscrew the screws to remove and replace it if necessary with a new one (or carrying out the repair); we apply the reverse procedure for reassembly!

Posted on 5 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan Resistor on a Peugeot 307
How to Replace the Cabin Fan Resistor on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the cabin fan resistor on a Peugeot 307, unscrew the screws that secure the plastic side panel located on the right side of the driver's f…
Guide to Replacing the Cabin Fan on the Peugeot 307
Guide to Replacing the Cabin Fan on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this guide, you will find the main instructions useful for removing and replacing the cabin fan on the Peugeot 307. First, get inside the vehicle …
How to Replace the Cabin Fan on a Peugeot 307
How to Replace the Cabin Fan on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the cabin fan on a Peugeot 307, remove the rivets that secure the carpet at the driver's side footwell and also remove the side panel of t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos