Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Maintenance Light on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Warning light – error code

In this short tutorial, learn how to reset the maintenance service light on a Peugeot 2008 MK1. Start by turning on the ignition without starting the engine. Press and hold the SET button located below the information display. The display will light up, and a countdown will appear; continue holding the button until the time expires. Now, release the SET button. Turn off and then turn on the ignition again to check that the maintenance service light has been reset.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the Peugeot 2008
How to reset the maintenance light on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In a few simple steps, we will reset the service light for the regular maintenance of the engine oil change on the Peugeot 2008. First, we get into t…
Resetting the Maintenance Light on Peugeot 2008
Resetting the Maintenance Light on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this video tutorial, you can see how to reset the maintenance light on a Peugeot 2008. To start, press and hold the "Set" button located on the ri…
How to reset the "Service" light on a Peugeot 2008?
How to reset the "Service" light on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) To reset the "Service" light on a Peugeot 2008, start by turning on the instrument panel without starting the engine. Use the central touch screen to…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos