Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Tail light bulb

To replace the rear headlamp bulb, you need to remove the headlamp itself: access the boot, move the carpet lining to reach the headlamp housing; disconnect the power connector and unscrew the plastic fixing rings; release the fixing tab and remove the headlamp; at this point, unscrew the fixing nut of the bulb holder and move it away from the headlamp to proceed with replacing the bulb (bayonet fitting); if any other bulbs appear blackened, replace those as well. Reverse the steps for reassembly.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Peugeot 206
How to replace the rear headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will explain how to replace the rear headlight bulb of a 2001 Peugeot 206 car. To replace the bulb, we need to open the trunk and remove the…
How to Replace the Rear Bulb of a Peugeot 206
How to Replace the Rear Bulb of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you start, open the tailgate of your Peugeot 206. Begin by unclipping and removing the hooks that secure the side carpet of the boot, which wi…
How to Replace the Rear Bulb of a Peugeot 206
How to Replace the Rear Bulb of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, open the tailgate of the boot of your Peugeot 206. Begin by unclipping and removing the clips that secure the side carpet. This will…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos