Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

Replacing the front headlamp bulb is one of the simplest DIY maintenance tasks, unless it requires removing the headlamp itself or the entire bumper, as in some car models. In this case, there is enough space to carry out the replacement quickly: remove the protective cap corresponding to the bulb holder, disconnect the power connector, unclip the retaining spring, and extract the old bulb (H1 model). Then insert the new bulb, orienting it correctly, secure it by attaching the spring, reconnect the power connector, and reposition the cap.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on a Peugeot 206
Replacing the Headlight Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s see how to replace the front headlight bulbs on a Peugeot 206. Lift the bonnet by pulling the lever located at the bottom right of the dashboar…
Removing Front Headlight Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the front headlight bulbs on a Peugeot 206? Let's look at removing the bulbs and parts of the front headlight. Open the bonnet by …
How to Change the Headlight Bulbs on a Peugeot 206 Plus
How to Change the Headlight Bulbs on a Peugeot 206 Plus
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs fitted on a Peugeot 206. If they are damaged, replace them. Open the access panel, pull the bonnet release lever;…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos