Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on a 2015 Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

The video shows how to reset the service light on a 2015 Peugeot 208. It is a very simple operation that can be done alone and requires little time. With the engine off, turn the key to the first click only, then press the SET button next to the service light, which is currently illuminated. A ten-second countdown will begin. Keep the SET button pressed throughout the countdown. At the end of the ten seconds, the service light will reset. At this point, turn off the ignition and start the vehicle. If the service light remains off, the reset has been successful.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 208 (2012-2019 / A9, MK 1) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) The video shows how to reset the service light on a 2021 Peugeot 208. It is a very simple operation that requires very little time and does not requi…
Peugeot 208 (2012-2019 / A9, MK 1) The operation referred to the Peugeot 208 1.2 Puretech is quite simple to perform DIY, accessible to anyone. When servicing the vehicle, you must fir…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos