Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing Your Car Radio

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

Video tutorial

The following guide shows how to correctly replace your car radio. Start by removing the old radio; to do this, follow the instructions in your car's manual and insert two levers at the sides to disengage the internal clips, pulling it towards you. Once done, disconnect the radio connectors by pressing the small plastic lever on the connectors and pulling them outwards.

Next, detach the antenna and connect the new radio before reattaching all the connectors. You cannot go wrong as they all have mandatory fittings.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Peugeot 206
How to Remove the Radio from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Want to remove the radio from a Peugeot 206? Use original or aftermarket metal keys to detach the car radio. Insert the keys into the slots (located …
How to Replace the Car Radio in a Peugeot 206
How to Replace the Car Radio in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Insert the metal keys into the four holes found in the original car radio. Pull firmly towards you to extract the device. Disconnect the power cable …
Replacing the Car Radio on a Peugeot 206
Replacing the Car Radio on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) With the engine and instrument cluster off, begin removing the original car radio. This is a very simple operation and we will demonstrate it now. As…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos