Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the oil filter on Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Oil filter
Operation: How to replace the oil filter on Peugeot 2008?

In order to replace the oil filter of the Peugeot 2008 you have to go and open the hood so that you can access the components below. In order to remove the oil filter, it will be necessary to first remove the air filter and its duct. The removal of these components will allow you to unscrew the bolt in the upper part of the filter, so that the latter can be extracted from its housing. In this way it will be possible to insert the new oil filter, fixing it in its seat and also installing all the parts removed previously.


Posted on 30 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - When should the oil filter in the Peugeot 2008 be replaced? Read Answer
    • Peugeot 2008 2013-2019 - Where is the Peugeot 2008 oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos