Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil filter and engine oil in the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Engine oil

Today we will explain how to perform the oil and oil filter replacement on a Peugeot 2008 vehicle, produced from 2013 to 2019. To perform the oil replacement on your own, you need to open the front hood and unscrew the oil tank cap. Lift the car and remove the oil pan cap to let the used oil drain into a container. Close the cap when finished. Start the car on the ground and remove the oil filter using a 27mm socket wrench. Clean the filter box, replace the rubber gasket, and insert the new filter. Install the box back into the vehicle and close the front hood.

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Filter on a Peugeot 2008
How to Replace the Engine Oil and Filter on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To change the engine oil and filter on a Peugeot 2008, warm up the engine for a few minutes, then turn it off and place the vehicle on a stable surfa…
How to Replace the Oil Filter on a Peugeot 2008
How to Replace the Oil Filter on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the oil filter on a Peugeot 2008, open the bonnet to access the underlying components. To remove the oil filter, first take out the air fi…
How to Change the Oil on the 2020 Peugeot 2008?
How to Change the Oil on the 2020 Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Let's see how to change the engine oil on the latest version of the Peugeot 2008. This video uses a 2020 vehicle, but the tutorial is also valid for …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos