Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on the 2020 Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

Let's see how to change the engine oil on the latest version of the Peugeot 2008. This video uses a 2020 vehicle, but the tutorial is also valid for vehicles from nearby years. Start in the engine bay, where you will remove the oil filler cap. However, the most challenging and time-consuming part takes place under the vehicle, which is best lifted on a ramp or axle stands, as you first need to remove the engine protection panel and then drain the oil sump and replace the filter.

Only after this, return to the engine bay to refill the oil reservoir.


Posted on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Filter on a Peugeot 2008
How to Replace the Engine Oil and Filter on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To change the engine oil and filter on a Peugeot 2008, warm up the engine for a few minutes, then turn it off and place the vehicle on a stable surfa…
How to change the engine oil of the Peugeot 2008.
How to change the engine oil of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) On the second-generation Peugeot 2008 (1.2 PureTech), the oil change with filter replacement is performed with the vehicle stationary and secure. The…
Oil and Filter Change for the Peugeot 2008 Petrol
Oil and Filter Change for the Peugeot 2008 Petrol
Peugeot 2008 (2013-2019 / MK 1) In this video, we will see how to change the oil and filter on the Peugeot 2008 petrol: open the bonnet and unscrew the oil filler cap; it is advisab…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos