Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Opening the Hood of the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Convertible top

Video tutorial

In this guide, we will see the steps to open the hood of the Peugeot 206, following the instructions below. First, open the vehicle and get inside the car; then press the button located at the top, on the roof lining, to start opening the automatic hood, as shown in the video.

At this point, wait about twenty seconds to complete the opening process of the hood; now you can resume driving, applying the reverse procedure to close the automatic hood!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Open the Roof of the Peugeot 206 CC?
How to Open the Roof of the Peugeot 206 CC?
Peugeot 206 (1998-2012 / MK 1) To open the roof of the Peugeot 206 CC, go inside the cabin and remove the clips located between the top of the windscreen and the bottom of the roof…
How do you dismantle the pistons of the Peugeot 206 CC convertible top?
How do you dismantle the pistons of the Peugeot 206 CC convertible top?
Peugeot 206 (1998-2012 / MK 1) In order to disassemble the pistons of the convertible top of the Peugeot 206 CC, you need to pry with an object in order to detach the trim panel lo…
How to service the roof pump of a Peugeot 206 cc
How to service the roof pump of a Peugeot 206 cc
Peugeot 206 (1998-2012 / MK 1) To remove the pump that controls the convertible roof of a Peugeot 206 cc for servicing, first open the boot and remove the two pressure screws from …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos