Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to service the roof pump of a Peugeot 206 cc

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

To remove the pump that controls the convertible roof of a Peugeot 206 cc for servicing, first open the boot and remove the two pressure screws from the upholstery, which you can now open. Underneath, there is the pump that controls the roof movement.

Disconnect the connectors and extract the pump, which is inside a casing. Once the casing is removed, open the pump and disconnect the upper and side connectors, many of which are not pressure connectors and must be removed with a spanner.

At this point, you have removed the pump, which you can service at your convenience. It will almost certainly just be the used oil, which you can change easily.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to open the convertible top of the Peugeot 206
How to open the convertible top of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will explain how to open and close the roof of the Peugeot 206. Opening the roof is a simple and quick operation that is performed after tur…
How to Open the Roof of the Peugeot 206 CC?
How to Open the Roof of the Peugeot 206 CC?
Peugeot 206 (1998-2012 / MK 1) To open the roof of the Peugeot 206 CC, go inside the cabin and remove the clips located between the top of the windscreen and the bottom of the roof…
Guide to Opening the Hood of the Peugeot 206
Guide to Opening the Hood of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, we will see the steps to open the hood of the Peugeot 206, following the instructions below. First, open the vehicle and get inside th…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos