Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the Peugeot Traveller?

Model: Peugeot Traveller MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: AdBlue warning light

Video tutorial

To reset the AdBlue warning light on this model, simply top up the fluid until it is above the minimum level. To do this, locate the filler cap for the tank, which is found low on the left-hand pillar of your vehicle, and open the driver's side door to access it. Open the filler cap and take the additive canister, using a funnel or a tube to transfer it into the tank.

Once you have topped up, close the cap and turn the ignition back on.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Remove the AdBlue Light in a Peugeot Traveller Van?
How to Remove the AdBlue Light in a Peugeot Traveller Van?
Peugeot Traveller (2016-2024 / MK 1) If the AdBlue light has illuminated on the instrument cluster of your Peugeot Traveller van, it means that the fluid in the emissions system has reac…
How to Reset the Service Light on the 2017 Peugeot Traveller
How to Reset the Service Light on the 2017 Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) The service light on the 2017 Peugeot Traveller illuminates when a service is due and needs to be reset. Follow these steps to reset the light: First…
How to reset the Service light on the Peugeot Traveller?
How to reset the Service light on the Peugeot Traveller?
Peugeot Traveller (2016-2024 / MK 1) To reset the Service light on the Peugeot Traveller, press and hold the button with the spanner icon located at the bottom centre of the instrument c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos