Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump

This guide briefly explains the instructions and steps to disassemble and replace the fuel pump on the Peugeot 206. First, open the rear doors and remove the rear seat. Next, take off the fabric covering and disconnect the fuel supply line and the electrical connector of the float, as shown in the video. Now, unscrew the fuel pump ring and remove it from the tank. Replace the pump or float with the new one, applying the reverse procedure for reassembly!

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Peugeot 206
Replacement of the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This short and simple procedure will show us how to disassemble and replace the fuel pump of the Peugeot 206, as well as the Citroen C3. First, we op…
How to dismantle the fuel pump of the Peugeot 206
How to dismantle the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at the procedure necessary to dismantle and replace the fuel pump of the Peugeot 206. First, open the rear doors and start by removing the…
Where is the fuel pump located in the Peugeot 206?
Where is the fuel pump located in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this video, you can see where the fuel pump is located in the Peugeot 206, useful if you need to replace it or the associated float. As shown, the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos