Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel pump located in the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump

In this video, you can see where the fuel pump is located in the Peugeot 206, useful if you need to replace it or the associated float. As shown, the pump is positioned at the top of the tank and is accessible from inside the cabin by first removing the rear seat and then opening the cap on the right. To extract the pump, simply disconnect both the power connector and the two fuel hoses, then unscrew the large outer ring. Finally, follow the reverse procedure to fit the replacement.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Peugeot 206
Replacement of the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This short and simple procedure will show us how to disassemble and replace the fuel pump of the Peugeot 206, as well as the Citroen C3. First, we op…
How to dismantle the fuel pump of the Peugeot 206
How to dismantle the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at the procedure necessary to dismantle and replace the fuel pump of the Peugeot 206. First, open the rear doors and start by removing the…
How to Replace the Fuel Pump on the Peugeot 206
How to Replace the Fuel Pump on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide briefly explains the instructions and steps to disassemble and replace the fuel pump on the Peugeot 206. First, open the rear doors and re…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos